Marsh Stencil Cutter
Model R, R5, S, H, & Q Parts List
Main Page, Name Plate Down, Top Cover, Feed Wheels, Underside
In PDF: Owners Manual, Instructions for replacing punch and die.
| RP01A-R | Cap, hex head (1") |
| RP01A-SHQ | Cap, hex head (1/4", 1/2", 3/4") |
| RP01D-SHQ | Nut, hex jam |
| RP01PL-H | Plate, table (1/2") (Not shown in picture) |
| RP01PL-Q | Plate, table (1/4") (Not shown in picture) |
| RP01PL-S | Plate, table (3/4") (Not shown in picture) |
| RP01X-H | Base, with shaft and plate (1/2") |
| RP01X-Q | Base, with shaft and plate (1/4") |
| RP01X-R | Base, with center shaft (1") |
| RP01X-S | Base, with shaft and plate (3/4") |
| RP02-R | Hood (1") |
| RP02-SHQ | Hood (1/4", 1/2", 3/4") |
| RP03-R | Carrier, Die (1”) |
| RP03-SHQ | Carrier, Die (1/4”, 1/2”, 3/4”) |
| RP04A | Screw,cap head hex |
| RP04-R | Carrier punch (1") |
| RP04-SHQ | Carrier, punch (1/4", 1/2", 3/4") |
| RP05X-R | Holder, punch and shank assy (1") |
| RP05X-SHQ | Holder, punch and shank assy (1/4", 1/2", 3/4") |
| RP06B-R | Screw, punch (1") |
| RP06B-SHQ | Screw, punch (1/4", 1/2", 3/4") |
| RP06C-R | Screw, die (1") |
| RP06C-SHQ | Screw, die (1/4", 1/2", 3/4") |
| RP07X | Wheel assy, hand |
| RP08 | Holder, dial |
| RP08B | Screw, set square head |
| RP09A | Screw, cap hex head |
| RP10 | Cam assy, centering |
| RP12- SHQ | Link (1/4", 1/2", 3/4") |
| RP12-R | Link (1" machine) |
| RP13A | Washer, link pin right |
| RP14 | Rocker assy |
| RP15 | Roller assy, lower feed |
| RP1503B | Screw, cap hex head |
| RP1503C | Washer |
| RP15C | Bar, adjustment |
| RP15D | Spacer |
| RP15G | Screw, round head slotted |
| RP15N | Nut, hex jam |
| RP1611-AR | Washer, sprag spring |
| RP16A | Eccentric shaft stop pin |
| RP16D | Stud, spring |
| RP16E | Collar, spring stud |
| RP16G | Cap, eccentric shaft handle |
| RP16-R | Shaft assy, eccentric (1") |
| RP16S | Spring, lower feed roll |
| RP16-SHQ | Shaft assy, eccentric (1/4", 1/2", 3/4") |
| RP16W | Washer |
| RP17 | Button, release shaft |
| RP17S | Spring, release button |
| RP18 | Pawl, stop |
| RP18A | Screw, stop pawl |
| RP18B | Pin, release button |
| RP19A | Wick, center shaft oil |
| RP19W1 | Washer |
| RP19W2 | Washer |
| RP20X-R | Handle, assy operating (1" ) |
| RP20X-SHQ | Handle, assy operating (1/4", 1/2", 3/4") |
| RP21 | Washer |
| RP22 | Shaft, handle |
| RP22A | Nut, hex |
| RP22B | Washer, lock internal tooth |
| RP23A | Bushing, feed wheel |
| RP23LB-H | Wheel assy, feed left (1/2") |
| RP23LB-Q | Wheel assy, feed left (1/4") |
| RP23LB-R | Wheel assy, feed left (1") |
| RP23LB-S | Wheel assy, feed left (3/4") |
| RP23R | Wheel, feed right |
| RP23W | Washer, feed wheel |
| RP24 | Follower, spacing cam |
| RP25E | Stud, spring spacing |
| RP25-H | Cam assy, spacing (1/2") |
| RP25-Q | Cam assy, spacing (1/4") |
| RP25-R | Cam assy, spacing (1") |
| RP25S | Spring, spacing finger |
| RP25-S | Cam assy, spacing (3/4") |
| RP26S-R | Spring, punch (1") |
| RP26S-SHQ | Spring, punch (1/4", 1/2", 3/4") |
| RP26W-R | Washer, rubber (1") |
| RP26W-SHQ | Washer, rubber (1/4", 1/2", 3/4") |
| RP27 | Retainer, spring |
| RP27944 | Grip, Handle 7/8" Flangeless |
| RP28 | Rocker assy, centering |
| RP29 | Stud, centering rocker |
| RP30S | Spring, centering arm |
| RP30X-R | Arm assy, centering (1") |
| RP30X-SHQ | Arm assy, centering (1/4", 1/2", 3/4") |
| RP31 | Plunger assy |
| RP3157 | Ring, lock |
| RP32 | Dial blank, manual |
| RP32A | Screw, phillips truss head |
| RP33 | Stripper assy (1/4", 1/2", 3/4", 1") |
| RP33101 | Shaft, center (1/4", 1/2", 3/4") |
| RP35A | Arm liner, assy centering |
| RP35B | O-ring |
| RP35SW | Washer |
| RP35W | Washer |
| RP36 | Bushing, spacing cam |
| RP36B | Screw, cap hex head |
| RP37 | Stud, spring |
| RP37S | Spring, handle |
| RP38 | Screw, slot flat head |
| RP38A | Nut |
| RP38B | Washer, lock internal tooth |
| RP42 | Screw, set socket flat |
| RP43 | Cover plate, front |
| RP43A | Screw, phillips pan head |
| RP44 | Stop, spacing |
| RP47 | Screw, set square head |
| RP47A | Nut, hex jam |
| RP47B | Washer, lock integral tooth |
| RP48-R | Screw, set (1") |
| RP48-SHQ 5 | Screw, set (1/4", 1/2", 3/4") |
| RP51N | Nut |
| RP77 | Foot, rubber |
| RP78-R | Washer, felt (1") |
| RP78-SHQ | Washer, felt (1/4", 1/2", 3/4") |
| RP79 | Washer, felt |
| RPH5DP | Punch and die – set of 40 1/2" characters |
| RPJ500-0011-008 | Screw, phillips flat head (1/4", 1/2", 3/4") |
| RPQ5DP | Punch and die – set of 40 1/4" characters |
| RPR5DP | Punch and die – set of 40 1" characters |
| RPS5DP | Punch and die – set of 40 3/4" characters |
| RPTC19 | Washer |